|
1548 Saybrook Rd Middletown Ct 06457 860 343-0552 11:30 am - 6 pm eastern Send in your bolt for the CPC 10/22 L.R. Bolt Combo Rework... Bolt is diassembled, cleaned and polished... Headspace is surface ground and squared to a .0425 rim depth, the same as a bolt action rifle too tweek in alittle accuracy... A hole is "E.D.M.'ed", a hardened ground solid dowel pin is pressed in over the top of the front of the firing pin... This new dowel pin keeps the front of firing pin from raising up and causing flyers and gives more consistant firing pin strikes... Rear / bottom of bolt body is full radiused for smoother/better bolt function with standard and high velocity ammo's... The seen outside of bolt is beautifully prism jeweled as a finishing touch... Send in complete bolt assembly with $49 plus $6 s&h.. Check or M.O. ($55 cash is good so there is no wait for check to clear)... U.S. Mail or UPS, no Fed-X... Turnaround... After it arrives - max it can be here is 2 weeks... If there is 2 or more bolts in package, its $49 each plus one $6 s&h... Do not multiply s&h. ( if bolt is to be used with .17 Mach2 ammo, note heavy bolt option and small radius notes below). CPC REV.3 EDM EXTRACTOR can be added and installed to above bolt rework by adding $10.. Bolt body can be "blackened" instead of jeweling. Bolt is polished than cold blued - same price, just note change... Bolt can also be be ordered shining 'polished' with no jeweling... Both available on above reworked customer bolts or below new bolt orders... NEW Complete Ruger 10/22 L.R. Bolt Assembly with above CPC rework done can be ordered over phone with credit card with full radius or small radius... New bolt is complete with firing pin and a CPC Rev.3 EDM extractor, $84 plus $6 s&h... |
|
All orders are sent by Priority Mail... Delivery outside the U.S. is sent Global Priority mail, price is $13 s&h, Canada, Ireland, England, any place where legal... Please do not send Canadian postal money orders, call or send MC or Visa credit card # and expire date or U.S. cash... Notes; CPC does not exchange bolts or parts, customer gets their own bolt and parts back... CPC does not work on Volquartsen bolts nor any non-Ruger made bolts... CPC does work using customer provided aftermarket extractor and/or firing pin... CPC REV.3 EDM EXTRACTORS are sold here and installed in either L.R. or Magnum bolts, - add $10 to order... You can order 10/22 bolt rework or a new bolt noting - "Full radius",- which is used for normal shooting of standard and high velocity ammo, - or "Small Radius" on bolts mostly shooting .22 Hyper velocity ammo or the new .17 HM2... CPC Heavy HM2 Bolt Option... Install weights inside bolt body for shooting .17 HM2 ammo... Same exact weight gain as using a heavy handle but weight is in-line with rifles blowback eliminating the out of line heavy handle... Add $59 for 'Heavy Option' to bolt rework or new bolt purchase... Large discount on new complete CPC bolt assemblies when ordering 5 or more, call... Please send payment with order... Please see pictures on bottom of page... |
|
www.ct-precision.com Full CPC website, barrel rework, Ruger tuneups, trigger jobs, 10/22, 77/22, Mini-14, High Standard barrels ect. EMAIL = randyatcpc@webtv.net |
Connecticut Precision Chambering LLC
1548 Saybrook Rd
Middletown CT 06457
1-860-343-0552 11:30 am - 6 pm eastern
All images and content copyrighted.
Copyrighted 2009 Connecticut Precision
Chambering LLC. All Rights Reserved.
9 photos below courtesy of Michael in Oregon
Jeweled bolt shows that you put some work into your rifle and even took care of the little things
Added magazine release extension, overtravel stop, anti-creep stop, auto-bolt release and crisp 2.25 lb trigger pull all standard on CPC 10/22 trigger job...
Outside of bolt is polished.
Dowel pin over firing pin.
CPC 10/22 bolt rework. Headspace is surface ground to .0425 depth. Prism jeweled.
'T' barrel with target crown backbored in 2 inches deep for increased accuracy... (Backbore can be done to Ruger 'T' barrels only)... See crown options page on main website www.ct-precision.com
Three crown options are available for Ruger hammer forged barrels, (a) this is a backbored crown, (b) the sporter taper version (shown below) is also available plus (c) a recessed target 11 degree crown, at any finished length customer wants...
There are also crown options for Tuneups done on the 10/22 using the carbine barrels with open sights or aftermarket barrels, ect...
Optional but free cleaning hole in rear...
Tough nylon bolt stop pin is also free with CPC 10/22 Tuneups.
Inside receiver is stoned flat, to remove burrs, but is not polished.
CPC FreeBore chamber + chamber and entry polish. Barrels extractor slot is put in at correct angle and depth...
On carbine models with open sights, barrel is fixture installed so sights are leveled correctly on top... About half of CPC 10/22 Tuneups are with open sight carbine barrels...
Barrel is setback to a CPC FreeBore semi-auto match chamber designed for Ruger 10/22's, lapped, recrowned by 1 of 3 different crown options and re-installed with a tighter lockup...
Competition High Standard slab sided barrel with optional .22 Dovetail scope ring mount cuts in top of barrel to eliminate scope mount & lower dot sight... Custom made from a Douglas Premium XX air gaged barrel blank and blued by Glenrock Blue at www.gunbluing.com... See High Standard page on main website www.ct-precision.com... Picture is by 'Jack H'...
Below 3 photos courtesy of Centre DeVeere
Ruger T barrel sporter tapered crown... This one was threaded into the Ruger receiver eliminating the V-block part making a stable rifle... Barrel is finished at 19 inches...
Ruger T or RRR barrels only... Tapered from end of stock forward by 8.5" to a .62" dia recessed 11 degree target crown... Removes .5 lb of front weight and produces the best accuracy from the hammer forged barrel... See crown options page on main website...
|
|
| |
|
|
||
|
|
||
|
|
||